{"id":180,"date":"2019-07-25T12:46:14","date_gmt":"2019-07-25T12:46:14","guid":{"rendered":"http:\/\/54.193.76.135\/?post_type=product&p=180"},"modified":"2020-12-14T17:10:16","modified_gmt":"2020-12-14T17:10:16","slug":"insteon-remote-control-micro-dimmer-switch-adapter","status":"publish","type":"product","link":"https:\/\/wosecure.com\/?product=insteon-remote-control-micro-dimmer-switch-adapter","title":{"rendered":"Insteon Remote Control Micro Dimmer Switch Adapter"},"content":{"rendered":"\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
General<\/b><\/td>\n<\/tr>\n
Manufacturer<\/td>\nInsteon<\/td>\n<\/tr>\n
Manufacturer Product No.<\/td>\n2442-222<\/td>\n<\/tr>\n
UPC<\/td>\n813922012705<\/td>\n<\/tr>\n
Warranty<\/td>\n2 Years<\/td>\n<\/tr>\n
Insteon Features<\/b><\/td>\n<\/tr>\n
Insteon<\/td>\nController and responder<\/td>\n<\/tr>\n
Maximum Links\/Scenes<\/td>\n400<\/td>\n<\/tr>\n
Load Brightness Levels<\/td>\n32 locally (256 with software)<\/td>\n<\/tr>\n
Status LED<\/td>\nGreen when load is on | Red when load is off
\nBlinks Red once when responder does not acknowledge | blinks Green once if all responders acknowledge (can be disabled via software)
\nBlinks Green or Red during setup
\nBlinks Red to indicate traffic (must be enabled via software)<\/td>\n<\/tr>\n
LED Brightness<\/td>\nAdjustable from off to 100% bright<\/td>\n<\/tr>\n
Local On-Level<\/td>\nAdjustable from 32 fixed brightness levels or resume dim<\/td>\n<\/tr>\n
Local Ramp Rate<\/td>\nAdjustable from 0.1 second to 5 seconds locally (0.1 seconds to 9 minutes with software)<\/td>\n<\/tr>\n
Local control<\/td>\nYes<\/td>\n<\/tr>\n
Commands Supported As Controller<\/td>\nOn | Off
\nFast On | Fast Off
\nBegin Brighten | End Brighten
\nBegin Dim | End Dim<\/td>\n<\/tr>\n
Commands Supported As Responder<\/td>\nOn | Off
\nFast On | Fast Off
\nBegin Bright | End Brighten
\nBegin Dim | End Dim
\nIncremental Brighten | Incremental Dim
\nBeep<\/td>\n<\/tr>\n
Software Configurable<\/td>\nYes<\/td>\n<\/tr>\n
Ramp Rates (full-On to full-Off)<\/td>\n0.125 to 9 seconds if programmed locally,
\n0.125 seconds to 8 minutes if programmed remotely via software<\/td>\n<\/tr>\n
RF Range<\/td>\n150 ft. (depending on your home\u2019s construction)<\/td>\n<\/tr>\n
Phase Detect Beacon<\/td>\nYes<\/td>\n<\/tr>\n
Insteon Device Category<\/td>\n0x01 dimmable lighting control (all frequencies)<\/td>\n<\/tr>\n
Insteon Device Subcategory<\/td>\n2442-222 (915MHz) | 0x35<\/td>\n<\/tr>\n
Mechanical<\/b><\/td>\n<\/tr>\n
Mounting<\/td>\nBehind switch or above light fixture in single-gang electrical box<\/td>\n<\/tr>\n
Wire Connections<\/td>\nSense 1 (yellow): 24 AWG, 0.205mm\u00b2
\nSense 2 (purple): 24 AWG, 0.205mm\u00b2<\/td>\n<\/tr>\n
Max. Cable Size<\/td>\n4mm\u00b2, 12 AWG (2.72mm diameter)<\/td>\n<\/tr>\n
Min. Cable Size<\/td>\n1.5mm\u00b2, 15 AWG<\/td>\n<\/tr>\n
Screw Clamp Connections<\/td>\nLine
\nLoad
\nNeutral
\nNeutral 2<\/td>\n<\/tr>\n
Case Color<\/td>\nWhite<\/td>\n<\/tr>\n
Set Button<\/td>\nYes<\/td>\n<\/tr>\n
Plastic<\/td>\nUV stabilized ABS+PC<\/td>\n<\/tr>\n
Beeper<\/td>\nYes<\/td>\n<\/tr>\n
Beep On Button Press<\/td>\nBeeps when button is pressed or connected switch is tapped (must be enabled via software)<\/td>\n<\/tr>\n
LED<\/td>\n1 RGB<\/td>\n<\/tr>\n
Dimensions<\/td>\n1.8″ x 1.8″ x 0.7″(H x W x D)<\/td>\n<\/tr>\n
Weight<\/td>\n2.52 oz<\/td>\n<\/tr>\n
Operating Environment<\/td>\nIndoors<\/td>\n<\/tr>\n
Operating Temperature Range<\/td>\n32\u00b0 to 104\u00b0F (0\u00b0 to 40\u00b0C)<\/td>\n<\/tr>\n
Operating Humidity Range<\/td>\n0-90% Relative Humidity<\/td>\n<\/tr>\n
Storage Temperature Range<\/td>\n-4\u00b0 to 158\u00b0F (-20\u00b0 to 70\u00b0C)<\/td>\n<\/tr>\n
Electrical<\/b><\/td>\n<\/tr>\n
Voltage<\/td>\n100VAC to 240VAC<\/td>\n<\/tr>\n
Frequency<\/td>\n50\/60Hz auto-detected at power-up<\/td>\n<\/tr>\n
Load<\/td>\nMin. 5W, Max. 200W<\/td>\n<\/tr>\n
Load Types<\/td>\nIncandescent<\/td>\n<\/tr>\n
Hardwired Remote Control<\/td>\nYes, either latching or momentary switches supported<\/td>\n<\/tr>\n
Retain All Settings Without Power<\/td>\nYes, saved in non-volatile EEPROM<\/td>\n<\/tr>\n
Standby Power Consumption<\/td>\n<w< td=””><\/w<><\/td>\n<\/tr>\n
Safety Approved<\/td>\nETL, CE, C-Tick<\/td>\n<\/tr>\n
Certifications<\/td>\nFCC, UL, IEC, EN<\/td>\n<\/tr>\n
FCC ID<\/td>\nSBPMM01<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n","protected":false},"excerpt":{"rendered":"
    \n
  • Wires in behind your existing switches or fixtures<\/li>\n
  • Sense wires allow for control via a connected, hard-wired switch<\/li>\n
  • Minimum 5W, Maximum 200W<\/li>\n
  • Compatible with latching, single momentary and dual momentary switches<\/li>\n
  • Programmable on-level and ramp rate<\/li>\n
  • This product is an Insteon Dual-Band device<\/li>\n<\/ul>\n","protected":false},"featured_media":182,"comment_status":"open","ping_status":"closed","template":"","meta":[],"_links":{"self":[{"href":"https:\/\/wosecure.com\/index.php?rest_route=\/wp\/v2\/product\/180"}],"collection":[{"href":"https:\/\/wosecure.com\/index.php?rest_route=\/wp\/v2\/product"}],"about":[{"href":"https:\/\/wosecure.com\/index.php?rest_route=\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/wosecure.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=180"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/wosecure.com\/index.php?rest_route=\/wp\/v2\/media\/182"}],"wp:attachment":[{"href":"https:\/\/wosecure.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=180"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}